When to replace your work boots (2023)

Special work boots are essential for people working in hazardous environments. They're specifically designed to keep your feet comfortable, which is vital for jobs that require hours of standing and walking. But more important than ever is its ability to protect workers from injury, shock or other adverse conditions.That is why choosing the right type of work boots is a must.

Your work boots are an excellent investment. But as much as you might want to keep them for as long as possible, nothing in life lasts forever, including your work boots. But how do you know when it's time to kick off your boots and buy a new pair?

(Video) When To Replace Your Work Boots

When should you replace your work shoes?

A quality pair of boots will give you years of pleasure. However, you probably wear your shoes every time you go to work. Even the most expensive and durable material wears out, especially if the shoe is worn regularly.

On average, the lifespan of work boots is six to twelve months. Leather boots when worn by a mason can last about six months. On the other hand, cowboy boots are much more durable and can last between five and ten years. Suede Boots are standard in Engineering and Manufacturing jobs. Unfortunately, they don't last as long as the other work boots mentioned. They usually have a shelf life of four to five months.

(Video) When should I replace my boots? | Ask The Boot Guy | #38

The above information is only an estimate. With proper care and maintenance it is possible to extend the life of your work boots to 24 months or more! This usually depends on several factors, including:

  • the material used
  • your work
  • The environment you expose your work shoes to
  • Possible dangers that can cause injuries from slipping and falling objects
  • How often are boots worn?

That probably makes everything a lot more confusing. To your relief, there are a few signs that it's time to buy a new pair of work boots, including the following:

(Video) Work Boots Full Restoration ** Full Vibram Soles**

  1. The soles or the part that comes into contact with the ground or uneven terrain will be damaged or worn out. Lint, holes or cracks form on the soles.
  2. Insoles or the part your feet come in contact with no longer provide the cushioning you need. If you're not comfortable in your work boots, there's no point in stopping them.
  3. Do the flexibility test by hanging your boots by their laces. Then try to touch the toe of the shoe with your heel. If it deflects completely with almost no resistance, your shoes need replacing. Work boots don't need to be flexible, but they do look and feel a bit flexible. However, if they have become too loose, it's time to buy a new pair.
  4. Damaged midsoles are also an indication that you need to change your boots, especially if they no longer offer the same cushioning as when you bought them. A notable change is the reduction in the height of the shoe, indicating that the midsoles have worn down.

If you have steel floor foundations, make sure the steel floor does not tip backwards, which can happen if a heavy object falls on it. In this case, you can search and find a replacementWe have steel toe work boots on offer.Of course, the damage is not immediately visible, but you will feel it after a few days of use. Honestly, there is no strict time frame for replacing work shoes. Consider the signs above and decide if you need a new pair. However, a good boot should last about six months. If you put heavy use on the shoes and wear them for several hours a day, they can last three to six months.

When to replace your work boots (1)

avoid injuries

If you see signs of damage, stop wearing your work shoes. You wear your work boots for a reason and that is for your protection.Security is not an aspect of thrift.Damaged or worn boots can cause cracks, soles that come off during work, and even blisters and pain. When you work in a humid environment, water can easily seep through the cracks and get your feet wet.

(Video) How to Select the Best Insole For Your Work Boots

Make sure you wear good quality shoes that are appropriate for your job. Australia has strict requirements for protective clothing and equipment, including footwearAS/NZS 2210.Choose work boots that protect your feet from:

  • Heavy objects that fall or roll
  • Sharp objects that can cut or puncture your feet
  • slippery surfaces
  • hot surfaces
  • Corrosive and toxic components
  • electrocution or electrocution
  • Explosions from static electrical discharges

Work boots are not always comfortable, especially when first worn. New boots take 80-100 hours to break in. That means it will take you about four days to get used to your shoes. To avoid wincing at work because your feet hurt, keep a second pair to switch to for a few days. Repeat the process until you feel comfortable in your new boots.


Care of your work shoes

You can increase the longevity of your work boots. So that you can enjoy your shoes for a long time, here are a few proven tips:

  • Have an alternate pair.Your favorite pair may have gotten wet, but there's no time to let them dry for work the next day. Instead of wearing those boots, wear your other pair. Ideally, you should have two extra pairs. If that's not possible, alternate your two pairs of boots every week. This way you expose them to less stress and environmental influences.
  • Wear your work boots to work.Keep another pair when you're not on the job site, especially for everyday use. This helps reduce wear and tear on the boots.
  • Boot care is important.Includes cleaning, cleaning and polishing. If there are worn parts that can be repaired, you should repair them immediately. Buy important boot care items such as wax, polishing pads, boot covers from the range ofAccessories for work boots that we have available.

Work shoes can help prevent injuries in the workplace. But don't wear old, worn-out boots because they won't provide the protection you bought them for. When it's time to change out your work boots, you've come to the right place. go to usWork boots sectionand find the right pair for you here at The Workers Shop.

(Video) When to replace your steel toe boots! Short clip from one of our safety lessons. #steeltoe


1. When to replace your steel toe boots! Short clip from one of our safety lessons. #steeltoe
2. Why it took 57 years to replace jungle boots
(Rose Anvil)
3. Always take care of your feet! replace your work boots. Saw Nelly last night SA rodeo.
(Texas Style Junk Removal (Stephen Robles))
4. CONSIDER THIS Before Repairing Your Shoes | Potential Unexpected Costs of Shoe Repair
(Trenton & Heath)
5. Most COMFORTABLE Work Boots | BEST Boots of 2023
(Pro Tool Reviews)
6. Work Boots for Every Occasion | Timberland Boondock against all
(Sawing with Sandy)
Top Articles
Latest Posts
Article information

Author: Fredrick Kertzmann

Last Updated: 11/27/2022

Views: 6166

Rating: 4.6 / 5 (46 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Fredrick Kertzmann

Birthday: 2000-04-29

Address: Apt. 203 613 Huels Gateway, Ralphtown, LA 40204

Phone: +2135150832870

Job: Regional Design Producer

Hobby: Nordic skating, Lacemaking, Mountain biking, Rowing, Gardening, Water sports, role-playing games

Introduction: My name is Fredrick Kertzmann, I am a gleaming, encouraging, inexpensive, thankful, tender, quaint, precious person who loves writing and wants to share my knowledge and understanding with you.